| HARDWARE FEATURES |
| Processor |
Qualcomm Atheros 560MHz CPU, MIPS 74Kc |
| Memory |
64MB DDR2 RAM, 8MB Flash |
| Interface |
1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) |
| 1 Grounding Terminal |
| 1 Reset Button |
| Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) |
| Voltage range: 16-27VDC |
| Power Consumption |
10.5 Watts Max |
| Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. |
| Dimensions ( W x D x H ) |
224 x 79 x 60 mm |
| Antenna Type |
Built-in 9dBi 2x2 Dual-polarized Directional Antenna |
| Beam Width: 65° (H-Plane) / 35° (E-Plane) |
| Note: For more details, please refer to datasheet |
| Protection |
15KV ESD Protection |
| 6KV Lightning Protection |
| Enclosure |
Outdoor ASA stabilized plastic material |
| IPX5 waterproof Certification |
| WIRELESS FEATURES |
| Wireless Standards |
IEEE 802.11b/g/n (with Pharos MAXtream disabled) |
| Proprietary Protocol |
TDMA Mode (with Pharos MAXtream enabled) |
| Wireless Speeds |
Up to 300Mbps (40MHz,Dynamic) |
| Up to 144.4Mbps (20MHz,Dynamic) |
| Up to 72.2Mbps (10MHz,Dynamic) |
| Up to 36.1Mbps (5MHz,Dynamic) |
| Frequency |
2.4~2.483GHz |
| Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. |
| Transmission Power |
27dBm/500mw (Adjustable power by 1dBm) |
| Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. |
| SOFTWARE FEATURES |
| Wireless Configurations |
Pharos MAXtream TDMA Technology |
| 802.11b/g/n Modes |
| Selectable Channel Width: 5/10/20/40MHz |
| Automatic Channel Selection |
| Transmission Power Control |
| Dynamic Frequency Selection (DFS) |
| WDS Enable/Disable |
| Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
| SSID Broadcast Enable/Disable |
| Multi-SSID with VLAN Tagging (AP mode only) |
| Distance/ACK Timeout Setting |
| Wireless MAC Address Filter |
| Wireless Advanced: |
| > Beacon Interval/RTS Threshold/Fragmentation |
| >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Management |
Discovery and Remote Management via Pharos Control application |
| HTTP/HTTPS Web-based management |
| System Log |
| SNMP Agent(v2c) |
| Ping Watch Dog |
| Dynamic DDNS |
| SSH Server |
| System Tools |
Wireless Signal Quality Indicators: |
| Signal Strength/Noise/Transmit CCQ/CPU/Memory |
| Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP |
| Spectrum Analyzer |
| Speed Test |
| Ping |
| Traceroute |
| System-level Optimizations |
Optimized IGMP Snooping/Proxy for multicast applications |
| Hardware watch dog |
| POE ADAPTER FEATURES |
| Dimensions (W x D x H) |
110*57*33.5mm |
| Interfaces |
1 AC Jack with Earth Ground |
| 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) |
| 1 10/100/1000Mbps Shielded Ethernet Port (Data) |
| Button |
Remote Reset Button |
| Power Status LEDs |
Green |
| Input |
100-240VAC, 50/60Hz |
| Input Voltage |
100VA~240VAC @ 50Hz~60Hz |
| Input Current |
0.4A Max @ 100VAC |
| Output |
24VDC, 1.0A Max |
| +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
| Output Voltage |
24VDC(+4,5pins; -7,8pins) |
| Efficiency |
>80% |
| Certifications |
CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| OTHERS |
| Certification |
CE, FCC, RoHS, IPX5 |
| Package Contents |
Outdoor Wireless CPE |
| 24V 1A Passive PoE Adapter |
| Pole Mounting Straps |
| AC Power Cord |
| Installation Guide |
| System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. |
| Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. |